[LON-CAPA-cvs] cvs: loncom /build Makefile /xml LCMathComplex.pm lonxml.pm doc/loncapafiles buildfiles.lpml lcmathcomplex.piml loncapafiles.lpml
raeburn
raeburn at source.lon-capa.org
Tue Oct 29 17:01:21 EDT 2013
raeburn Tue Oct 29 21:01:21 2013 EDT
Added files:
/doc/loncapafiles lcmathcomplex.piml
/loncom/xml LCMathComplex.pm
Modified files:
/doc/loncapafiles buildfiles.lpml loncapafiles.lpml
/loncom/build Makefile
/loncom/xml lonxml.pm
Log:
- Bug 6629.
- Re-enable access to functionality in Math::Complex in Safe Space by
copying Math::Complex 1.55 to LONCAPA::LCMathComplex and eliminating use
of Config.pm
- Whenever ./UPDATE is run to install or update LON-CAPA, the code which
sets $nvsize in the standard Math::Complex script will be run in
lcmathcomplex.piml and the value of $nvsize will be set to the
appropriate value: 4, 8, 10, 12 or 16 in LONCAPA/LCMathComplex.pm.
-------------- next part --------------
Index: doc/loncapafiles/buildfiles.lpml
diff -u doc/loncapafiles/buildfiles.lpml:1.30 doc/loncapafiles/buildfiles.lpml:1.31
--- doc/loncapafiles/buildfiles.lpml:1.30 Wed Aug 7 18:20:22 2013
+++ doc/loncapafiles/buildfiles.lpml Tue Oct 29 21:01:10 2013
@@ -2,7 +2,7 @@
"http://lpml.sourceforge.net/DTD/lpml.dtd">
<!-- buildfiles.lpml -->
-<!-- $Id: buildfiles.lpml,v 1.30 2013/08/07 18:20:22 raeburn Exp $ -->
+<!-- $Id: buildfiles.lpml,v 1.31 2013/10/29 21:01:10 raeburn Exp $ -->
<!--
@@ -387,6 +387,16 @@
</note>
</file>
<file>
+ <source>doc/loncapafiles/lcmathcomplex.piml</source>
+ <target dist='default'>lcmathcomplex.piml</target>
+ <categoryname>system file</categoryname>
+ <description>
+Use perl core module Config.pm to determine nvsize and set value for this scalar in /home/httpd/lib/perl/LONCAPA/LCMathComplex.pm. LCMathComplex.pm is used instead of the core perl module Math::Complex in Safe Space, because the dependency on Config.pm is eliminated.
+ </description>
+ <note>
+ </note>
+</file>
+<file>
<source>doc/loncapafiles/valid_hosts.xfml</source>
<target dist='default'>valid_hosts.xfml</target>
<categoryname>system file</categoryname>
Index: doc/loncapafiles/loncapafiles.lpml
diff -u doc/loncapafiles/loncapafiles.lpml:1.860 doc/loncapafiles/loncapafiles.lpml:1.861
--- doc/loncapafiles/loncapafiles.lpml:1.860 Sat Oct 26 21:22:32 2013
+++ doc/loncapafiles/loncapafiles.lpml Tue Oct 29 21:01:10 2013
@@ -2,7 +2,7 @@
"http://lpml.sourceforge.net/DTD/lpml.dtd">
<!-- loncapafiles.lpml -->
-<!-- $Id: loncapafiles.lpml,v 1.860 2013/10/26 21:22:32 raeburn Exp $ -->
+<!-- $Id: loncapafiles.lpml,v 1.861 2013/10/29 21:01:10 raeburn Exp $ -->
<!--
@@ -7046,6 +7046,16 @@
<status>works/unverified</status>
</file>
<file>
+<source>loncom/xml/LCMathComplex.pm</source>
+<target dist='default'>home/httpd/lib/perl/LONCAPA/LCMathComplex.pm</target>
+<categoryname>config</categoryname>
+<description>
+Modified version of Math::Complex 1.55 for use in Safe Space which eliminates
+dependency on Config.pm (not usable in Safe Space).
+</description>
+<status>works/unverified</status>
+</file>
+<file>
<source>loncom/lonlocal.pm</source>
<target dist='default'>home/httpd/lib/perl/LONCAPA/lonlocal.pm</target>
<categoryname>system file</categoryname>
Index: loncom/build/Makefile
diff -u loncom/build/Makefile:1.205 loncom/build/Makefile:1.206
--- loncom/build/Makefile:1.205 Fri Aug 9 06:24:32 2013
+++ loncom/build/Makefile Tue Oct 29 21:01:16 2013
@@ -1,6 +1,6 @@
# The LearningOnline Network with CAPA
-# $Id: Makefile,v 1.205 2013/08/09 06:24:32 raeburn Exp $
+# $Id: Makefile,v 1.206 2013/10/29 21:01:16 raeburn Exp $
# TYPICAL USAGE of this Makefile is primarily for two targets:
# "make build" and "make install".
@@ -153,8 +153,9 @@
@echo "mimetex_version_check: check if mimetex.cgi version has changed,"
@echo " if so remove files from mimetexcache."
@echo "latex_fmtutil: run utility to maintain TeX format files system-wide."
- @echo "removenolongerused.piml: check if there are files from previous
- @echo " LON-CAPA version; if so, prompt for removal."
+ @echo "lcmathcomplex: set nvsize in LCMathComplex, if different from default."
+ @echo "removenolongerused: check if there are files from previous
+ @echo " LON-CAPA version; if so, prompt for removal."
@echo "updatequery: solicit the user for machine configuration"
@echo " information; to be incorporated during an update"
@echo " procedure (via the UPDATE command)"
@@ -527,6 +528,11 @@
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
+lcmathcomplex:
+ cat $(SOURCE)/doc/loncapafiles/lcmathcomplex.piml | \
+ perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+ tee -a WARNINGS
+
removenolongerused:
cat $(SOURCE)/doc/loncapafiles/removenolongerused.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(QUERYLAUNCH)
@@ -556,6 +562,7 @@
make mimetex_version_check
make verify_domconfiguser
make latex_fmtutil
+ make lcmathcomplex
sed -i "s/\x08\x08*/.../g" WARNINGS
VERSION:
install -d $(TARGET)/etc
Index: loncom/xml/lonxml.pm
diff -u loncom/xml/lonxml.pm:1.543 loncom/xml/lonxml.pm:1.544
--- loncom/xml/lonxml.pm:1.543 Sat Sep 21 14:33:13 2013
+++ loncom/xml/lonxml.pm Tue Oct 29 21:01:21 2013
@@ -1,7 +1,7 @@
# The LearningOnline Network with CAPA
# XML Parser Module
#
-# $Id: lonxml.pm,v 1.543 2013/09/21 14:33:13 raeburn Exp $
+# $Id: lonxml.pm,v 1.544 2013/10/29 21:01:21 raeburn Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -651,7 +651,7 @@
my ($target,$safeeval,$safehole,$safeinit) = @_;
$safeeval->reval('use LaTeX::Table;');
$safeeval->deny_only(':dangerous');
- $safeeval->reval('use Math::Complex;');
+ $safeeval->reval('use LONCAPA::LCMathComplex;');
$safeeval->permit_only(":default");
$safeeval->permit("entereval");
$safeeval->permit(":base_math");
Index: doc/loncapafiles/lcmathcomplex.piml
+++ doc/loncapafiles/lcmathcomplex.piml
<!DOCTYPE piml PUBLIC "-//TUX/DTD piml 1.0 Final//EN"
"http://lpml.sourceforge.net/DTD/piml.dtd">
<!-- lcmathcomplex.piml -->
<!-- $Id: lcmathcomplex.piml,v 1.1 2013/10/29 21:01:10 raeburn Exp $ -->
<!--
This file is part of the LearningOnline Network with CAPA (LON-CAPA).
LON-CAPA is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
LON-CAPA is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with LON-CAPA; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
/home/httpd/html/adm/gpl.txt
http://www.lon-capa.org/
-->
<piml>
<targetroot>/</targetroot>
<files>
<file>
<target dist="default">/home/httpd/lonUsers</target>
<perlscript mode="fg">
use strict;
use Config;
my $nvsize = $Config{nvsize} ||
($Config{uselongdouble} && $Config{longdblsize}) ||
$Config{doublesize};
unless ($nvsize =~ /^\d+$/) {
print "Unexpected value: $nvsize determined for nvsize from Config.pm for use in LCMathComplex.pm\n";
exit;
}
my $fh;
my ($mathcomplex,$changed);
if (open($fh,"</home/httpd/lib/perl/LONCAPA/LCMathComplex.pm")) {
while (<$fh>) {
if (/^\s*\Qmy $nvsize = \E(\d+);/) {
my $currsize = $1;
if ($currsize != $nvsize) {
$changed = 1;
$mathcomplex .= ' my $nvsize = '.$nvsize.';'."\n";
} else {
print "nvsize in LCMathComplex.pm already set to $nvsize -- no action required.\n";
last;
}
} else {
$mathcomplex .= $_;
}
}
close($fh);
if ($changed) {
if (open($fh,">/home/httpd/lib/perl/LONCAPA/LCMathComplex.pm")) {
print $fh $mathcomplex;
close($fh);
print "nvsize now set to $nvsize in LCMathComplex.pm\n";
}
}
}
</perlscript>
</file>
</files>
</piml>
Index: loncom/xml/LCMathComplex.pm
+++ loncom/xml/LCMathComplex.pm
#
# Complex numbers and associated mathematical functions
# -- Raphael Manfredi Since Sep 1996
# -- Jarkko Hietaniemi Since Mar 1997
# -- Daniel S. Lewart Since Sep 1997
#
# -- Stuart Raeburn: renamed package as LCMathComplex Oct 2013
# with minor changes to allow use in Safe Space
#
package LONCAPA::LCMathComplex;
use vars qw($VERSION @ISA @EXPORT @EXPORT_OK %EXPORT_TAGS $Inf $ExpInf);
$VERSION = 1.55;
BEGIN {
my %DBL_MAX =
(
4 => '1.70141183460469229e+38',
8 => '1.7976931348623157e+308',
# AFAICT the 10, 12, and 16-byte long doubles
# all have the same maximum.
10 => '1.1897314953572317650857593266280070162E+4932',
12 => '1.1897314953572317650857593266280070162E+4932',
16 => '1.1897314953572317650857593266280070162E+4932',
);
my $nvsize = 8;
die "LONCAPA::LCMathComplex: Could not figure out nvsize\n"
unless defined $nvsize;
die "LONCAPA::LCMathComplex: Cannot not figure out max nv (nvsize = $nvsize)\n"
unless defined $DBL_MAX{$nvsize};
my $DBL_MAX = eval $DBL_MAX{$nvsize};
die "LONCAPA::LCMathComplex: Could not figure out max nv (nvsize = $nvsize)\n"
unless defined $DBL_MAX;
my $BIGGER_THAN_THIS = 1e30; # Must find something bigger than this.
if ($^O eq 'unicosmk') {
$Inf = $DBL_MAX;
} else {
local $SIG{FPE} = { };
local $!;
# We do want an arithmetic overflow, Inf INF inf Infinity.
for my $t (
'exp(99999)', # Enough even with 128-bit long doubles.
'inf',
'Inf',
'INF',
'infinity',
'Infinity',
'INFINITY',
'1e99999',
) {
local $^W = 0;
my $i = eval "$t+1.0";
if (defined $i && $i > $BIGGER_THAN_THIS) {
$Inf = $i;
last;
}
}
$Inf = $DBL_MAX unless defined $Inf; # Oh well, close enough.
die "LONCAPA::LCMathComplex: Could not get Infinity"
unless $Inf > $BIGGER_THAN_THIS;
$ExpInf = exp(99999);
}
# print "# On this machine, Inf = '$Inf'\n";
}
use strict;
my $i;
my %LOGN;
# Regular expression for floating point numbers.
# These days we could use Scalar::Util::lln(), I guess.
my $gre = qr'\s*([\+\-]?(?:(?:(?:\d+(?:_\d+)*(?:\.\d*(?:_\d+)*)?|\.\d+(?:_\d+)*)(?:[eE][\+\-]?\d+(?:_\d+)*)?))|inf)'i;
require Exporter;
@ISA = qw(Exporter);
my @trig = qw(
pi
tan
csc cosec sec cot cotan
asin acos atan
acsc acosec asec acot acotan
sinh cosh tanh
csch cosech sech coth cotanh
asinh acosh atanh
acsch acosech asech acoth acotanh
);
@EXPORT = (qw(
i Re Im rho theta arg
sqrt log ln
log10 logn cbrt root
cplx cplxe
atan2
),
@trig);
my @pi = qw(pi pi2 pi4 pip2 pip4 Inf);
@EXPORT_OK = @pi;
%EXPORT_TAGS = (
'trig' => [@trig],
'pi' => [@pi],
);
use overload
'+' => \&_plus,
'-' => \&_minus,
'*' => \&_multiply,
'/' => \&_divide,
'**' => \&_power,
'==' => \&_numeq,
'<=>' => \&_spaceship,
'neg' => \&_negate,
'~' => \&_conjugate,
'abs' => \&abs,
'sqrt' => \&sqrt,
'exp' => \&exp,
'log' => \&log,
'sin' => \&sin,
'cos' => \&cos,
'tan' => \&tan,
'atan2' => \&atan2,
'""' => \&_stringify;
#
# Package "privates"
#
my %DISPLAY_FORMAT = ('style' => 'cartesian',
'polar_pretty_print' => 1);
my $eps = 1e-14; # Epsilon
#
# Object attributes (internal):
# cartesian [real, imaginary] -- cartesian form
# polar [rho, theta] -- polar form
# c_dirty cartesian form not up-to-date
# p_dirty polar form not up-to-date
# display display format (package's global when not set)
#
# Die on bad *make() arguments.
sub _cannot_make {
die "@{[(caller(1))[3]]}: Cannot take $_[0] of '$_[1]'.\n";
}
sub _make {
my $arg = shift;
my ($p, $q);
if ($arg =~ /^$gre$/) {
($p, $q) = ($1, 0);
} elsif ($arg =~ /^(?:$gre)?$gre\s*i\s*$/) {
($p, $q) = ($1 || 0, $2);
} elsif ($arg =~ /^\s*\(\s*$gre\s*(?:,\s*$gre\s*)?\)\s*$/) {
($p, $q) = ($1, $2 || 0);
}
if (defined $p) {
$p =~ s/^\+//;
$p =~ s/^(-?)inf$/"${1}9**9**9"/e;
$q =~ s/^\+//;
$q =~ s/^(-?)inf$/"${1}9**9**9"/e;
}
return ($p, $q);
}
sub _emake {
my $arg = shift;
my ($p, $q);
if ($arg =~ /^\s*\[\s*$gre\s*(?:,\s*$gre\s*)?\]\s*$/) {
($p, $q) = ($1, $2 || 0);
} elsif ($arg =~ m!^\s*\[\s*$gre\s*(?:,\s*([-+]?\d*\s*)?pi(?:/\s*(\d+))?\s*)?\]\s*$!) {
($p, $q) = ($1, ($2 eq '-' ? -1 : ($2 || 1)) * pi() / ($3 || 1));
} elsif ($arg =~ /^\s*\[\s*$gre\s*\]\s*$/) {
($p, $q) = ($1, 0);
} elsif ($arg =~ /^\s*$gre\s*$/) {
($p, $q) = ($1, 0);
}
if (defined $p) {
$p =~ s/^\+//;
$q =~ s/^\+//;
$p =~ s/^(-?)inf$/"${1}9**9**9"/e;
$q =~ s/^(-?)inf$/"${1}9**9**9"/e;
}
return ($p, $q);
}
#
# ->make
#
# Create a new complex number (cartesian form)
#
sub make {
my $self = bless {}, shift;
my ($re, $im);
if (@_ == 0) {
($re, $im) = (0, 0);
} elsif (@_ == 1) {
return (ref $self)->emake($_[0])
if ($_[0] =~ /^\s*\[/);
($re, $im) = _make($_[0]);
} elsif (@_ == 2) {
($re, $im) = @_;
}
if (defined $re) {
_cannot_make("real part", $re) unless $re =~ /^$gre$/;
}
$im ||= 0;
_cannot_make("imaginary part", $im) unless $im =~ /^$gre$/;
$self->_set_cartesian([$re, $im ]);
$self->display_format('cartesian');
return $self;
}
#
# ->emake
#
# Create a new complex number (exponential form)
#
sub emake {
my $self = bless {}, shift;
my ($rho, $theta);
if (@_ == 0) {
($rho, $theta) = (0, 0);
} elsif (@_ == 1) {
return (ref $self)->make($_[0])
if ($_[0] =~ /^\s*\(/ || $_[0] =~ /i\s*$/);
($rho, $theta) = _emake($_[0]);
} elsif (@_ == 2) {
($rho, $theta) = @_;
}
if (defined $rho && defined $theta) {
if ($rho < 0) {
$rho = -$rho;
$theta = ($theta <= 0) ? $theta + pi() : $theta - pi();
}
}
if (defined $rho) {
_cannot_make("rho", $rho) unless $rho =~ /^$gre$/;
}
$theta ||= 0;
_cannot_make("theta", $theta) unless $theta =~ /^$gre$/;
$self->_set_polar([$rho, $theta]);
$self->display_format('polar');
return $self;
}
sub new { &make } # For backward compatibility only.
#
# cplx
#
# Creates a complex number from a (re, im) tuple.
# This avoids the burden of writing LONCAPA::LCMathComplex->make(re, im).
#
sub cplx {
return __PACKAGE__->make(@_);
}
#
# cplxe
#
# Creates a complex number from a (rho, theta) tuple.
# This avoids the burden of writing LONCAPA::LCMathComplex->emake(rho, theta).
#
sub cplxe {
return __PACKAGE__->emake(@_);
}
#
# pi
#
# The number defined as pi = 180 degrees
#
sub pi () { 4 * CORE::atan2(1, 1) }
#
# pi2
#
# The full circle
#
sub pi2 () { 2 * pi }
#
# pi4
#
# The full circle twice.
#
sub pi4 () { 4 * pi }
#
# pip2
#
# The quarter circle
#
sub pip2 () { pi / 2 }
#
# pip4
#
# The eighth circle.
#
sub pip4 () { pi / 4 }
#
# _uplog10
#
# Used in log10().
#
sub _uplog10 () { 1 / CORE::log(10) }
#
# i
#
# The number defined as i*i = -1;
#
sub i () {
return $i if ($i);
$i = bless {};
$i->{'cartesian'} = [0, 1];
$i->{'polar'} = [1, pip2];
$i->{c_dirty} = 0;
$i->{p_dirty} = 0;
return $i;
}
#
# _ip2
#
# Half of i.
#
sub _ip2 () { i / 2 }
#
# Attribute access/set routines
#
sub _cartesian {$_[0]->{c_dirty} ?
$_[0]->_update_cartesian : $_[0]->{'cartesian'}}
sub _polar {$_[0]->{p_dirty} ?
$_[0]->_update_polar : $_[0]->{'polar'}}
sub _set_cartesian { $_[0]->{p_dirty}++; $_[0]->{c_dirty} = 0;
$_[0]->{'cartesian'} = $_[1] }
sub _set_polar { $_[0]->{c_dirty}++; $_[0]->{p_dirty} = 0;
$_[0]->{'polar'} = $_[1] }
#
# ->_update_cartesian
#
# Recompute and return the cartesian form, given accurate polar form.
#
sub _update_cartesian {
my $self = shift;
my ($r, $t) = @{$self->{'polar'}};
$self->{c_dirty} = 0;
return $self->{'cartesian'} = [$r * CORE::cos($t), $r * CORE::sin($t)];
}
#
#
# ->_update_polar
#
# Recompute and return the polar form, given accurate cartesian form.
#
sub _update_polar {
my $self = shift;
my ($x, $y) = @{$self->{'cartesian'}};
$self->{p_dirty} = 0;
return $self->{'polar'} = [0, 0] if $x == 0 && $y == 0;
return $self->{'polar'} = [CORE::sqrt($x*$x + $y*$y),
CORE::atan2($y, $x)];
}
#
# (_plus)
#
# Computes z1+z2.
#
sub _plus {
my ($z1, $z2, $regular) = @_;
my ($re1, $im1) = @{$z1->_cartesian};
$z2 = cplx($z2) unless ref $z2;
my ($re2, $im2) = ref $z2 ? @{$z2->_cartesian} : ($z2, 0);
unless (defined $regular) {
$z1->_set_cartesian([$re1 + $re2, $im1 + $im2]);
return $z1;
}
return (ref $z1)->make($re1 + $re2, $im1 + $im2);
}
#
# (_minus)
#
# Computes z1-z2.
#
sub _minus {
my ($z1, $z2, $inverted) = @_;
my ($re1, $im1) = @{$z1->_cartesian};
$z2 = cplx($z2) unless ref $z2;
my ($re2, $im2) = @{$z2->_cartesian};
unless (defined $inverted) {
$z1->_set_cartesian([$re1 - $re2, $im1 - $im2]);
return $z1;
}
return $inverted ?
(ref $z1)->make($re2 - $re1, $im2 - $im1) :
(ref $z1)->make($re1 - $re2, $im1 - $im2);
}
#
# (_multiply)
#
# Computes z1*z2.
#
sub _multiply {
my ($z1, $z2, $regular) = @_;
if ($z1->{p_dirty} == 0 and ref $z2 and $z2->{p_dirty} == 0) {
# if both polar better use polar to avoid rounding errors
my ($r1, $t1) = @{$z1->_polar};
my ($r2, $t2) = @{$z2->_polar};
my $t = $t1 + $t2;
if ($t > pi()) { $t -= pi2 }
elsif ($t <= -pi()) { $t += pi2 }
unless (defined $regular) {
$z1->_set_polar([$r1 * $r2, $t]);
return $z1;
}
return (ref $z1)->emake($r1 * $r2, $t);
} else {
my ($x1, $y1) = @{$z1->_cartesian};
if (ref $z2) {
my ($x2, $y2) = @{$z2->_cartesian};
return (ref $z1)->make($x1*$x2-$y1*$y2, $x1*$y2+$y1*$x2);
} else {
return (ref $z1)->make($x1*$z2, $y1*$z2);
}
}
}
#
# _divbyzero
#
# Die on division by zero.
#
sub _divbyzero {
my $mess = "$_[0]: Division by zero.\n";
if (defined $_[1]) {
$mess .= "(Because in the definition of $_[0], the divisor ";
$mess .= "$_[1] " unless ("$_[1]" eq '0');
$mess .= "is 0)\n";
}
my @up = caller(1);
$mess .= "Died at $up[1] line $up[2].\n";
die $mess;
}
#
# (_divide)
#
# Computes z1/z2.
#
sub _divide {
my ($z1, $z2, $inverted) = @_;
if ($z1->{p_dirty} == 0 and ref $z2 and $z2->{p_dirty} == 0) {
# if both polar better use polar to avoid rounding errors
my ($r1, $t1) = @{$z1->_polar};
my ($r2, $t2) = @{$z2->_polar};
my $t;
if ($inverted) {
_divbyzero "$z2/0" if ($r1 == 0);
$t = $t2 - $t1;
if ($t > pi()) { $t -= pi2 }
elsif ($t <= -pi()) { $t += pi2 }
return (ref $z1)->emake($r2 / $r1, $t);
} else {
_divbyzero "$z1/0" if ($r2 == 0);
$t = $t1 - $t2;
if ($t > pi()) { $t -= pi2 }
elsif ($t <= -pi()) { $t += pi2 }
return (ref $z1)->emake($r1 / $r2, $t);
}
} else {
my ($d, $x2, $y2);
if ($inverted) {
($x2, $y2) = @{$z1->_cartesian};
$d = $x2*$x2 + $y2*$y2;
_divbyzero "$z2/0" if $d == 0;
return (ref $z1)->make(($x2*$z2)/$d, -($y2*$z2)/$d);
} else {
my ($x1, $y1) = @{$z1->_cartesian};
if (ref $z2) {
($x2, $y2) = @{$z2->_cartesian};
$d = $x2*$x2 + $y2*$y2;
_divbyzero "$z1/0" if $d == 0;
my $u = ($x1*$x2 + $y1*$y2)/$d;
my $v = ($y1*$x2 - $x1*$y2)/$d;
return (ref $z1)->make($u, $v);
} else {
_divbyzero "$z1/0" if $z2 == 0;
return (ref $z1)->make($x1/$z2, $y1/$z2);
}
}
}
}
#
# (_power)
#
# Computes z1**z2 = exp(z2 * log z1)).
#
sub _power {
my ($z1, $z2, $inverted) = @_;
if ($inverted) {
return 1 if $z1 == 0 || $z2 == 1;
return 0 if $z2 == 0 && Re($z1) > 0;
} else {
return 1 if $z2 == 0 || $z1 == 1;
return 0 if $z1 == 0 && Re($z2) > 0;
}
my $w = $inverted ? &exp($z1 * &log($z2))
: &exp($z2 * &log($z1));
# If both arguments cartesian, return cartesian, else polar.
return $z1->{c_dirty} == 0 &&
(not ref $z2 or $z2->{c_dirty} == 0) ?
cplx(@{$w->_cartesian}) : $w;
}
#
# (_spaceship)
#
# Computes z1 <=> z2.
# Sorts on the real part first, then on the imaginary part. Thus 2-4i < 3+8i.
#
sub _spaceship {
my ($z1, $z2, $inverted) = @_;
my ($re1, $im1) = ref $z1 ? @{$z1->_cartesian} : ($z1, 0);
my ($re2, $im2) = ref $z2 ? @{$z2->_cartesian} : ($z2, 0);
my $sgn = $inverted ? -1 : 1;
return $sgn * ($re1 <=> $re2) if $re1 != $re2;
return $sgn * ($im1 <=> $im2);
}
#
# (_numeq)
#
# Computes z1 == z2.
#
# (Required in addition to _spaceship() because of NaNs.)
sub _numeq {
my ($z1, $z2, $inverted) = @_;
my ($re1, $im1) = ref $z1 ? @{$z1->_cartesian} : ($z1, 0);
my ($re2, $im2) = ref $z2 ? @{$z2->_cartesian} : ($z2, 0);
return $re1 == $re2 && $im1 == $im2 ? 1 : 0;
}
#
# (_negate)
#
# Computes -z.
#
sub _negate {
my ($z) = @_;
if ($z->{c_dirty}) {
my ($r, $t) = @{$z->_polar};
$t = ($t <= 0) ? $t + pi : $t - pi;
return (ref $z)->emake($r, $t);
}
my ($re, $im) = @{$z->_cartesian};
return (ref $z)->make(-$re, -$im);
}
#
# (_conjugate)
#
# Compute complex's _conjugate.
#
sub _conjugate {
my ($z) = @_;
if ($z->{c_dirty}) {
my ($r, $t) = @{$z->_polar};
return (ref $z)->emake($r, -$t);
}
my ($re, $im) = @{$z->_cartesian};
return (ref $z)->make($re, -$im);
}
#
# (abs)
#
# Compute or set complex's norm (rho).
#
sub abs {
my ($z, $rho) = @_;
unless (ref $z) {
if (@_ == 2) {
$_[0] = $_[1];
} else {
return CORE::abs($z);
}
}
if (defined $rho) {
$z->{'polar'} = [ $rho, ${$z->_polar}[1] ];
$z->{p_dirty} = 0;
$z->{c_dirty} = 1;
return $rho;
} else {
return ${$z->_polar}[0];
}
}
sub _theta {
my $theta = $_[0];
if ($$theta > pi()) { $$theta -= pi2 }
elsif ($$theta <= -pi()) { $$theta += pi2 }
}
#
# arg
#
# Compute or set complex's argument (theta).
#
sub arg {
my ($z, $theta) = @_;
return $z unless ref $z;
if (defined $theta) {
_theta(\$theta);
$z->{'polar'} = [ ${$z->_polar}[0], $theta ];
$z->{p_dirty} = 0;
$z->{c_dirty} = 1;
} else {
$theta = ${$z->_polar}[1];
_theta(\$theta);
}
return $theta;
}
#
# (sqrt)
#
# Compute sqrt(z).
#
# It is quite tempting to use wantarray here so that in list context
# sqrt() would return the two solutions. This, however, would
# break things like
#
# print "sqrt(z) = ", sqrt($z), "\n";
#
# The two values would be printed side by side without no intervening
# whitespace, quite confusing.
# Therefore if you want the two solutions use the root().
#
sub sqrt {
my ($z) = @_;
my ($re, $im) = ref $z ? @{$z->_cartesian} : ($z, 0);
return $re < 0 ? cplx(0, CORE::sqrt(-$re)) : CORE::sqrt($re)
if $im == 0;
my ($r, $t) = @{$z->_polar};
return (ref $z)->emake(CORE::sqrt($r), $t/2);
}
#
# cbrt
#
# Compute cbrt(z) (cubic root).
#
# Why are we not returning three values? The same answer as for sqrt().
#
sub cbrt {
my ($z) = @_;
return $z < 0 ?
-CORE::exp(CORE::log(-$z)/3) :
($z > 0 ? CORE::exp(CORE::log($z)/3): 0)
unless ref $z;
my ($r, $t) = @{$z->_polar};
return 0 if $r == 0;
return (ref $z)->emake(CORE::exp(CORE::log($r)/3), $t/3);
}
#
# _rootbad
#
# Die on bad root.
#
sub _rootbad {
my $mess = "Root '$_[0]' illegal, root rank must be positive integer.\n";
my @up = caller(1);
$mess .= "Died at $up[1] line $up[2].\n";
die $mess;
}
#
# root
#
# Computes all nth root for z, returning an array whose size is n.
# `n' must be a positive integer.
#
# The roots are given by (for k = 0..n-1):
#
# z^(1/n) = r^(1/n) (cos ((t+2 k pi)/n) + i sin ((t+2 k pi)/n))
#
sub root {
my ($z, $n, $k) = @_;
_rootbad($n) if ($n < 1 or int($n) != $n);
my ($r, $t) = ref $z ?
@{$z->_polar} : (CORE::abs($z), $z >= 0 ? 0 : pi);
my $theta_inc = pi2 / $n;
my $rho = $r ** (1/$n);
my $cartesian = ref $z && $z->{c_dirty} == 0;
if (@_ == 2) {
my @root;
for (my $i = 0, my $theta = $t / $n;
$i < $n;
$i++, $theta += $theta_inc) {
my $w = cplxe($rho, $theta);
# Yes, $cartesian is loop invariant.
push @root, $cartesian ? cplx(@{$w->_cartesian}) : $w;
}
return @root;
} elsif (@_ == 3) {
my $w = cplxe($rho, $t / $n + $k * $theta_inc);
return $cartesian ? cplx(@{$w->_cartesian}) : $w;
}
}
#
# Re
#
# Return or set Re(z).
#
sub Re {
my ($z, $Re) = @_;
return $z unless ref $z;
if (defined $Re) {
$z->{'cartesian'} = [ $Re, ${$z->_cartesian}[1] ];
$z->{c_dirty} = 0;
$z->{p_dirty} = 1;
} else {
return ${$z->_cartesian}[0];
}
}
#
# Im
#
# Return or set Im(z).
#
sub Im {
my ($z, $Im) = @_;
return 0 unless ref $z;
if (defined $Im) {
$z->{'cartesian'} = [ ${$z->_cartesian}[0], $Im ];
$z->{c_dirty} = 0;
$z->{p_dirty} = 1;
} else {
return ${$z->_cartesian}[1];
}
}
#
# rho
#
# Return or set rho(w).
#
sub rho {
LONCAPA::LCMathComplex::abs(@_);
}
#
# theta
#
# Return or set theta(w).
#
sub theta {
LONCAPA::LCMathComplex::arg(@_);
}
#
# (exp)
#
# Computes exp(z).
#
sub exp {
my ($z) = @_;
my ($x, $y) = @{$z->_cartesian};
return (ref $z)->emake(CORE::exp($x), $y);
}
#
# _logofzero
#
# Die on logarithm of zero.
#
sub _logofzero {
my $mess = "$_[0]: Logarithm of zero.\n";
if (defined $_[1]) {
$mess .= "(Because in the definition of $_[0], the argument ";
$mess .= "$_[1] " unless ($_[1] eq '0');
$mess .= "is 0)\n";
}
my @up = caller(1);
$mess .= "Died at $up[1] line $up[2].\n";
die $mess;
}
#
# (log)
#
# Compute log(z).
#
sub log {
my ($z) = @_;
unless (ref $z) {
_logofzero("log") if $z == 0;
return $z > 0 ? CORE::log($z) : cplx(CORE::log(-$z), pi);
}
my ($r, $t) = @{$z->_polar};
_logofzero("log") if $r == 0;
if ($t > pi()) { $t -= pi2 }
elsif ($t <= -pi()) { $t += pi2 }
return (ref $z)->make(CORE::log($r), $t);
}
#
# ln
#
# Alias for log().
#
sub ln { LONCAPA::LCMathComplex::log(@_) }
#
# log10
#
# Compute log10(z).
#
sub log10 {
return LONCAPA::LCMathComplex::log($_[0]) * _uplog10;
}
#
# logn
#
# Compute logn(z,n) = log(z) / log(n)
#
sub logn {
my ($z, $n) = @_;
$z = cplx($z, 0) unless ref $z;
my $logn = $LOGN{$n};
$logn = $LOGN{$n} = CORE::log($n) unless defined $logn; # Cache log(n)
return &log($z) / $logn;
}
#
# (cos)
#
# Compute cos(z) = (exp(iz) + exp(-iz))/2.
#
sub cos {
my ($z) = @_;
return CORE::cos($z) unless ref $z;
my ($x, $y) = @{$z->_cartesian};
my $ey = CORE::exp($y);
my $sx = CORE::sin($x);
my $cx = CORE::cos($x);
my $ey_1 = $ey ? 1 / $ey : Inf();
return (ref $z)->make($cx * ($ey + $ey_1)/2,
$sx * ($ey_1 - $ey)/2);
}
#
# (sin)
#
# Compute sin(z) = (exp(iz) - exp(-iz))/2.
#
sub sin {
my ($z) = @_;
return CORE::sin($z) unless ref $z;
my ($x, $y) = @{$z->_cartesian};
my $ey = CORE::exp($y);
my $sx = CORE::sin($x);
my $cx = CORE::cos($x);
my $ey_1 = $ey ? 1 / $ey : Inf();
return (ref $z)->make($sx * ($ey + $ey_1)/2,
$cx * ($ey - $ey_1)/2);
}
#
# tan
#
# Compute tan(z) = sin(z) / cos(z).
#
sub tan {
my ($z) = @_;
my $cz = &cos($z);
_divbyzero "tan($z)", "cos($z)" if $cz == 0;
return &sin($z) / $cz;
}
#
# sec
#
# Computes the secant sec(z) = 1 / cos(z).
#
sub sec {
my ($z) = @_;
my $cz = &cos($z);
_divbyzero "sec($z)", "cos($z)" if ($cz == 0);
return 1 / $cz;
}
#
# csc
#
# Computes the cosecant csc(z) = 1 / sin(z).
#
sub csc {
my ($z) = @_;
my $sz = &sin($z);
_divbyzero "csc($z)", "sin($z)" if ($sz == 0);
return 1 / $sz;
}
#
# cosec
#
# Alias for csc().
#
sub cosec { LONCAPA::LCMathComplex::csc(@_) }
#
# cot
#
# Computes cot(z) = cos(z) / sin(z).
#
sub cot {
my ($z) = @_;
my $sz = &sin($z);
_divbyzero "cot($z)", "sin($z)" if ($sz == 0);
return &cos($z) / $sz;
}
#
# cotan
#
# Alias for cot().
#
sub cotan { LONCAPA::LCMathComplex::cot(@_) }
#
# acos
#
# Computes the arc cosine acos(z) = -i log(z + sqrt(z*z-1)).
#
sub acos {
my $z = $_[0];
return CORE::atan2(CORE::sqrt(1-$z*$z), $z)
if (! ref $z) && CORE::abs($z) <= 1;
$z = cplx($z, 0) unless ref $z;
my ($x, $y) = @{$z->_cartesian};
return 0 if $x == 1 && $y == 0;
my $t1 = CORE::sqrt(($x+1)*($x+1) + $y*$y);
my $t2 = CORE::sqrt(($x-1)*($x-1) + $y*$y);
my $alpha = ($t1 + $t2)/2;
my $beta = ($t1 - $t2)/2;
$alpha = 1 if $alpha < 1;
if ($beta > 1) { $beta = 1 }
elsif ($beta < -1) { $beta = -1 }
my $u = CORE::atan2(CORE::sqrt(1-$beta*$beta), $beta);
my $v = CORE::log($alpha + CORE::sqrt($alpha*$alpha-1));
$v = -$v if $y > 0 || ($y == 0 && $x < -1);
return (ref $z)->make($u, $v);
}
#
# asin
#
# Computes the arc sine asin(z) = -i log(iz + sqrt(1-z*z)).
#
sub asin {
my $z = $_[0];
return CORE::atan2($z, CORE::sqrt(1-$z*$z))
if (! ref $z) && CORE::abs($z) <= 1;
$z = cplx($z, 0) unless ref $z;
my ($x, $y) = @{$z->_cartesian};
return 0 if $x == 0 && $y == 0;
my $t1 = CORE::sqrt(($x+1)*($x+1) + $y*$y);
my $t2 = CORE::sqrt(($x-1)*($x-1) + $y*$y);
my $alpha = ($t1 + $t2)/2;
my $beta = ($t1 - $t2)/2;
$alpha = 1 if $alpha < 1;
if ($beta > 1) { $beta = 1 }
elsif ($beta < -1) { $beta = -1 }
my $u = CORE::atan2($beta, CORE::sqrt(1-$beta*$beta));
my $v = -CORE::log($alpha + CORE::sqrt($alpha*$alpha-1));
$v = -$v if $y > 0 || ($y == 0 && $x < -1);
return (ref $z)->make($u, $v);
}
#
# atan
#
# Computes the arc tangent atan(z) = i/2 log((i+z) / (i-z)).
#
sub atan {
my ($z) = @_;
return CORE::atan2($z, 1) unless ref $z;
my ($x, $y) = ref $z ? @{$z->_cartesian} : ($z, 0);
return 0 if $x == 0 && $y == 0;
_divbyzero "atan(i)" if ( $z == i);
_logofzero "atan(-i)" if (-$z == i); # -i is a bad file test...
my $log = &log((i + $z) / (i - $z));
return _ip2 * $log;
}
#
# asec
#
# Computes the arc secant asec(z) = acos(1 / z).
#
sub asec {
my ($z) = @_;
_divbyzero "asec($z)", $z if ($z == 0);
return acos(1 / $z);
}
#
# acsc
#
# Computes the arc cosecant acsc(z) = asin(1 / z).
#
sub acsc {
my ($z) = @_;
_divbyzero "acsc($z)", $z if ($z == 0);
return asin(1 / $z);
}
#
# acosec
#
# Alias for acsc().
#
sub acosec { LONCAPA::LCMathComplex::acsc(@_) }
#
# acot
#
# Computes the arc cotangent acot(z) = atan(1 / z)
#
sub acot {
my ($z) = @_;
_divbyzero "acot(0)" if $z == 0;
return ($z >= 0) ? CORE::atan2(1, $z) : CORE::atan2(-1, -$z)
unless ref $z;
_divbyzero "acot(i)" if ($z - i == 0);
_logofzero "acot(-i)" if ($z + i == 0);
return atan(1 / $z);
}
#
# acotan
#
# Alias for acot().
#
sub acotan { LONCAPA::LCMathComplex::acot(@_) }
#
# cosh
#
# Computes the hyperbolic cosine cosh(z) = (exp(z) + exp(-z))/2.
#
sub cosh {
my ($z) = @_;
my $ex;
unless (ref $z) {
$ex = CORE::exp($z);
return $ex ? ($ex == $ExpInf ? Inf() : ($ex + 1/$ex)/2) : Inf();
}
my ($x, $y) = @{$z->_cartesian};
$ex = CORE::exp($x);
my $ex_1 = $ex ? 1 / $ex : Inf();
return (ref $z)->make(CORE::cos($y) * ($ex + $ex_1)/2,
CORE::sin($y) * ($ex - $ex_1)/2);
}
#
# sinh
#
# Computes the hyperbolic sine sinh(z) = (exp(z) - exp(-z))/2.
#
sub sinh {
my ($z) = @_;
my $ex;
unless (ref $z) {
return 0 if $z == 0;
$ex = CORE::exp($z);
return $ex ? ($ex == $ExpInf ? Inf() : ($ex - 1/$ex)/2) : -Inf();
}
my ($x, $y) = @{$z->_cartesian};
my $cy = CORE::cos($y);
my $sy = CORE::sin($y);
$ex = CORE::exp($x);
my $ex_1 = $ex ? 1 / $ex : Inf();
return (ref $z)->make(CORE::cos($y) * ($ex - $ex_1)/2,
CORE::sin($y) * ($ex + $ex_1)/2);
}
#
# tanh
#
# Computes the hyperbolic tangent tanh(z) = sinh(z) / cosh(z).
#
sub tanh {
my ($z) = @_;
my $cz = cosh($z);
_divbyzero "tanh($z)", "cosh($z)" if ($cz == 0);
my $sz = sinh($z);
return 1 if $cz == $sz;
return -1 if $cz == -$sz;
return $sz / $cz;
}
#
# sech
#
# Computes the hyperbolic secant sech(z) = 1 / cosh(z).
#
sub sech {
my ($z) = @_;
my $cz = cosh($z);
_divbyzero "sech($z)", "cosh($z)" if ($cz == 0);
return 1 / $cz;
}
#
# csch
#
# Computes the hyperbolic cosecant csch(z) = 1 / sinh(z).
#
sub csch {
my ($z) = @_;
my $sz = sinh($z);
_divbyzero "csch($z)", "sinh($z)" if ($sz == 0);
return 1 / $sz;
}
#
# cosech
#
# Alias for csch().
#
sub cosech { LONCAPA::LCMathComplex::csch(@_) }
#
# coth
#
# Computes the hyperbolic cotangent coth(z) = cosh(z) / sinh(z).
#
sub coth {
my ($z) = @_;
my $sz = sinh($z);
_divbyzero "coth($z)", "sinh($z)" if $sz == 0;
my $cz = cosh($z);
return 1 if $cz == $sz;
return -1 if $cz == -$sz;
return $cz / $sz;
}
#
# cotanh
#
# Alias for coth().
#
sub cotanh { LONCAPA::LCMathComplex::coth(@_) }
#
# acosh
#
# Computes the area/inverse hyperbolic cosine acosh(z) = log(z + sqrt(z*z-1)).
#
sub acosh {
my ($z) = @_;
unless (ref $z) {
$z = cplx($z, 0);
}
my ($re, $im) = @{$z->_cartesian};
if ($im == 0) {
return CORE::log($re + CORE::sqrt($re*$re - 1))
if $re >= 1;
return cplx(0, CORE::atan2(CORE::sqrt(1 - $re*$re), $re))
if CORE::abs($re) < 1;
}
my $t = &sqrt($z * $z - 1) + $z;
# Try Taylor if looking bad (this usually means that
# $z was large negative, therefore the sqrt is really
# close to abs(z), summing that with z...)
$t = 1/(2 * $z) - 1/(8 * $z**3) + 1/(16 * $z**5) - 5/(128 * $z**7)
if $t == 0;
my $u = &log($t);
$u->Im(-$u->Im) if $re < 0 && $im == 0;
return $re < 0 ? -$u : $u;
}
#
# asinh
#
# Computes the area/inverse hyperbolic sine asinh(z) = log(z + sqrt(z*z+1))
#
sub asinh {
my ($z) = @_;
unless (ref $z) {
my $t = $z + CORE::sqrt($z*$z + 1);
return CORE::log($t) if $t;
}
my $t = &sqrt($z * $z + 1) + $z;
# Try Taylor if looking bad (this usually means that
# $z was large negative, therefore the sqrt is really
# close to abs(z), summing that with z...)
$t = 1/(2 * $z) - 1/(8 * $z**3) + 1/(16 * $z**5) - 5/(128 * $z**7)
if $t == 0;
return &log($t);
}
#
# atanh
#
# Computes the area/inverse hyperbolic tangent atanh(z) = 1/2 log((1+z) / (1-z)).
#
sub atanh {
my ($z) = @_;
unless (ref $z) {
return CORE::log((1 + $z)/(1 - $z))/2 if CORE::abs($z) < 1;
$z = cplx($z, 0);
}
_divbyzero 'atanh(1)', "1 - $z" if (1 - $z == 0);
_logofzero 'atanh(-1)' if (1 + $z == 0);
return 0.5 * &log((1 + $z) / (1 - $z));
}
#
# asech
#
# Computes the area/inverse hyperbolic secant asech(z) = acosh(1 / z).
#
sub asech {
my ($z) = @_;
_divbyzero 'asech(0)', "$z" if ($z == 0);
return acosh(1 / $z);
}
#
# acsch
#
# Computes the area/inverse hyperbolic cosecant acsch(z) = asinh(1 / z).
#
sub acsch {
my ($z) = @_;
_divbyzero 'acsch(0)', $z if ($z == 0);
return asinh(1 / $z);
}
#
# acosech
#
# Alias for acosh().
#
sub acosech { LONCAPA::LCMathComplex::acsch(@_) }
#
# acoth
#
# Computes the area/inverse hyperbolic cotangent acoth(z) = 1/2 log((1+z) / (z-1)).
#
sub acoth {
my ($z) = @_;
_divbyzero 'acoth(0)' if ($z == 0);
unless (ref $z) {
return CORE::log(($z + 1)/($z - 1))/2 if CORE::abs($z) > 1;
$z = cplx($z, 0);
}
_divbyzero 'acoth(1)', "$z - 1" if ($z - 1 == 0);
_logofzero 'acoth(-1)', "1 + $z" if (1 + $z == 0);
return &log((1 + $z) / ($z - 1)) / 2;
}
#
# acotanh
#
# Alias for acot().
#
sub acotanh { LONCAPA::LCMathComplex::acoth(@_) }
#
# (atan2)
#
# Compute atan(z1/z2), minding the right quadrant.
#
sub atan2 {
my ($z1, $z2, $inverted) = @_;
my ($re1, $im1, $re2, $im2);
if ($inverted) {
($re1, $im1) = ref $z2 ? @{$z2->_cartesian} : ($z2, 0);
($re2, $im2) = ref $z1 ? @{$z1->_cartesian} : ($z1, 0);
} else {
($re1, $im1) = ref $z1 ? @{$z1->_cartesian} : ($z1, 0);
($re2, $im2) = ref $z2 ? @{$z2->_cartesian} : ($z2, 0);
}
if ($im1 || $im2) {
# In MATLAB the imaginary parts are ignored.
# warn "atan2: Imaginary parts ignored";
# http://documents.wolfram.com/mathematica/functions/ArcTan
# NOTE: Mathematica ArcTan[x,y] while atan2(y,x)
my $s = $z1 * $z1 + $z2 * $z2;
_divbyzero("atan2") if $s == 0;
my $i = &i;
my $r = $z2 + $z1 * $i;
return -$i * &log($r / &sqrt( $s ));
}
return CORE::atan2($re1, $re2);
}
#
# display_format
# ->display_format
#
# Set (get if no argument) the display format for all complex numbers that
# don't happen to have overridden it via ->display_format
#
# When called as an object method, this actually sets the display format for
# the current object.
#
# Valid object formats are 'c' and 'p' for cartesian and polar. The first
# letter is used actually, so the type can be fully spelled out for clarity.
#
sub display_format {
my $self = shift;
my %display_format = %DISPLAY_FORMAT;
if (ref $self) { # Called as an object method
if (exists $self->{display_format}) {
my %obj = %{$self->{display_format}};
@display_format{keys %obj} = values %obj;
}
}
if (@_ == 1) {
$display_format{style} = shift;
} else {
my %new = @_;
@display_format{keys %new} = values %new;
}
if (ref $self) { # Called as an object method
$self->{display_format} = { %display_format };
return
wantarray ?
%{$self->{display_format}} :
$self->{display_format}->{style};
}
# Called as a class method
%DISPLAY_FORMAT = %display_format;
return
wantarray ?
%DISPLAY_FORMAT :
$DISPLAY_FORMAT{style};
}
#
# (_stringify)
#
# Show nicely formatted complex number under its cartesian or polar form,
# depending on the current display format:
#
# . If a specific display format has been recorded for this object, use it.
# . Otherwise, use the generic current default for all complex numbers,
# which is a package global variable.
#
sub _stringify {
my ($z) = shift;
my $style = $z->display_format;
$style = $DISPLAY_FORMAT{style} unless defined $style;
return $z->_stringify_polar if $style =~ /^p/i;
return $z->_stringify_cartesian;
}
#
# ->_stringify_cartesian
#
# Stringify as a cartesian representation 'a+bi'.
#
sub _stringify_cartesian {
my $z = shift;
my ($x, $y) = @{$z->_cartesian};
my ($re, $im);
my %format = $z->display_format;
my $format = $format{format};
if ($x) {
if ($x =~ /^NaN[QS]?$/i) {
$re = $x;
} else {
if ($x =~ /^-?\Q$Inf\E$/oi) {
$re = $x;
} else {
$re = defined $format ? sprintf($format, $x) : $x;
}
}
} else {
undef $re;
}
if ($y) {
if ($y =~ /^(NaN[QS]?)$/i) {
$im = $y;
} else {
if ($y =~ /^-?\Q$Inf\E$/oi) {
$im = $y;
} else {
$im =
defined $format ?
sprintf($format, $y) :
($y == 1 ? "" : ($y == -1 ? "-" : $y));
}
}
$im .= "i";
} else {
undef $im;
}
my $str = $re;
if (defined $im) {
if ($y < 0) {
$str .= $im;
} elsif ($y > 0 || $im =~ /^NaN[QS]?i$/i) {
$str .= "+" if defined $re;
$str .= $im;
}
} elsif (!defined $re) {
$str = "0";
}
return $str;
}
#
# ->_stringify_polar
#
# Stringify as a polar representation '[r,t]'.
#
sub _stringify_polar {
my $z = shift;
my ($r, $t) = @{$z->_polar};
my $theta;
my %format = $z->display_format;
my $format = $format{format};
if ($t =~ /^NaN[QS]?$/i || $t =~ /^-?\Q$Inf\E$/oi) {
$theta = $t;
} elsif ($t == pi) {
$theta = "pi";
} elsif ($r == 0 || $t == 0) {
$theta = defined $format ? sprintf($format, $t) : $t;
}
return "[$r,$theta]" if defined $theta;
#
# Try to identify pi/n and friends.
#
$t -= int(CORE::abs($t) / pi2) * pi2;
if ($format{polar_pretty_print} && $t) {
my ($a, $b);
for $a (2..9) {
$b = $t * $a / pi;
if ($b =~ /^-?\d+$/) {
$b = $b < 0 ? "-" : "" if CORE::abs($b) == 1;
$theta = "${b}pi/$a";
last;
}
}
}
if (defined $format) {
$r = sprintf($format, $r);
$theta = sprintf($format, $theta) unless defined $theta;
} else {
$theta = $t unless defined $theta;
}
return "[$r,$theta]";
}
sub Inf {
return $Inf;
}
1;
__END__
=pod
=head1 NAME
LONCAPA::LCMathComplex - complex numbers and associated mathematical functions
=head1 SYNOPSIS
use LONCAPA::LCMathComplex;
$z = LONCAPA::LCMathComplex->make(5, 6);
$t = 4 - 3*i + $z;
$j = cplxe(1, 2*pi/3);
=head1 DESCRIPTION
Derived from Math::Complex.
Modified for use in Safe Space in LON-CAPA by removing the dependency on
Config.pm introduced in rev. 1.51 (which contains calls that are disallowed
in Safe Space).
In this LON-CAPA-specific version, the following code changes were made.
15,16d17
< use Config;
<
29,31c30
< my $nvsize = $Config{nvsize} ||
< ($Config{uselongdouble} && $Config{longdblsize}) ||
< $Config{doublesize};
---
> my $nvsize = 8;
Note: the value assigned to $nvsize is 8 by default.
Whenever ./UPDATE is run to install or update LON-CAPA, the code which
sets $nvsize in the standard Math::Complex script will be run in
LCMathComplex_check.piml and the value of $nvsize will be set to the
appropriate value: 4, 8, 10, 12 or 16.
In addition all instances referring to Math::Complex were changed to
refer to LONCAPA::LCMathComplex instead.
This package lets you create and manipulate complex numbers. By default,
I<Perl> limits itself to real numbers, but an extra C<use> statement brings
full complex support, along with a full set of mathematical functions
typically associated with and/or extended to complex numbers.
If you wonder what complex numbers are, they were invented to be able to solve
the following equation:
x*x = -1
and by definition, the solution is noted I<i> (engineers use I<j> instead since
I<i> usually denotes an intensity, but the name does not matter). The number
I<i> is a pure I<imaginary> number.
The arithmetics with pure imaginary numbers works just like you would expect
it with real numbers... you just have to remember that
i*i = -1
so you have:
5i + 7i = i * (5 + 7) = 12i
4i - 3i = i * (4 - 3) = i
4i * 2i = -8
6i / 2i = 3
1 / i = -i
Complex numbers are numbers that have both a real part and an imaginary
part, and are usually noted:
a + bi
where C<a> is the I<real> part and C<b> is the I<imaginary> part. The
arithmetic with complex numbers is straightforward. You have to
keep track of the real and the imaginary parts, but otherwise the
rules used for real numbers just apply:
(4 + 3i) + (5 - 2i) = (4 + 5) + i(3 - 2) = 9 + i
(2 + i) * (4 - i) = 2*4 + 4i -2i -i*i = 8 + 2i + 1 = 9 + 2i
A graphical representation of complex numbers is possible in a plane
(also called the I<complex plane>, but it's really a 2D plane).
The number
z = a + bi
is the point whose coordinates are (a, b). Actually, it would
be the vector originating from (0, 0) to (a, b). It follows that the addition
of two complex numbers is a vectorial addition.
Since there is a bijection between a point in the 2D plane and a complex
number (i.e. the mapping is unique and reciprocal), a complex number
can also be uniquely identified with polar coordinates:
[rho, theta]
where C<rho> is the distance to the origin, and C<theta> the angle between
the vector and the I<x> axis. There is a notation for this using the
exponential form, which is:
rho * exp(i * theta)
where I<i> is the famous imaginary number introduced above. Conversion
between this form and the cartesian form C<a + bi> is immediate:
a = rho * cos(theta)
b = rho * sin(theta)
which is also expressed by this formula:
z = rho * exp(i * theta) = rho * (cos theta + i * sin theta)
In other words, it's the projection of the vector onto the I<x> and I<y>
axes. Mathematicians call I<rho> the I<norm> or I<modulus> and I<theta>
the I<argument> of the complex number. The I<norm> of C<z> is
marked here as C<abs(z)>.
The polar notation (also known as the trigonometric representation) is
much more handy for performing multiplications and divisions of
complex numbers, whilst the cartesian notation is better suited for
additions and subtractions. Real numbers are on the I<x> axis, and
therefore I<y> or I<theta> is zero or I<pi>.
All the common operations that can be performed on a real number have
been defined to work on complex numbers as well, and are merely
I<extensions> of the operations defined on real numbers. This means
they keep their natural meaning when there is no imaginary part, provided
the number is within their definition set.
For instance, the C<sqrt> routine which computes the square root of
its argument is only defined for non-negative real numbers and yields a
non-negative real number (it is an application from B<R+> to B<R+>).
If we allow it to return a complex number, then it can be extended to
negative real numbers to become an application from B<R> to B<C> (the
set of complex numbers):
sqrt(x) = x >= 0 ? sqrt(x) : sqrt(-x)*i
It can also be extended to be an application from B<C> to B<C>,
whilst its restriction to B<R> behaves as defined above by using
the following definition:
sqrt(z = [r,t]) = sqrt(r) * exp(i * t/2)
Indeed, a negative real number can be noted C<[x,pi]> (the modulus
I<x> is always non-negative, so C<[x,pi]> is really C<-x>, a negative
number) and the above definition states that
sqrt([x,pi]) = sqrt(x) * exp(i*pi/2) = [sqrt(x),pi/2] = sqrt(x)*i
which is exactly what we had defined for negative real numbers above.
The C<sqrt> returns only one of the solutions: if you want the both,
use the C<root> function.
All the common mathematical functions defined on real numbers that
are extended to complex numbers share that same property of working
I<as usual> when the imaginary part is zero (otherwise, it would not
be called an extension, would it?).
A I<new> operation possible on a complex number that is
the identity for real numbers is called the I<conjugate>, and is noted
with a horizontal bar above the number, or C<~z> here.
z = a + bi
~z = a - bi
Simple... Now look:
z * ~z = (a + bi) * (a - bi) = a*a + b*b
We saw that the norm of C<z> was noted C<abs(z)> and was defined as the
distance to the origin, also known as:
rho = abs(z) = sqrt(a*a + b*b)
so
z * ~z = abs(z) ** 2
If z is a pure real number (i.e. C<b == 0>), then the above yields:
a * a = abs(a) ** 2
which is true (C<abs> has the regular meaning for real number, i.e. stands
for the absolute value). This example explains why the norm of C<z> is
noted C<abs(z)>: it extends the C<abs> function to complex numbers, yet
is the regular C<abs> we know when the complex number actually has no
imaginary part... This justifies I<a posteriori> our use of the C<abs>
notation for the norm.
=head1 OPERATIONS
Given the following notations:
z1 = a + bi = r1 * exp(i * t1)
z2 = c + di = r2 * exp(i * t2)
z = <any complex or real number>
the following (overloaded) operations are supported on complex numbers:
z1 + z2 = (a + c) + i(b + d)
z1 - z2 = (a - c) + i(b - d)
z1 * z2 = (r1 * r2) * exp(i * (t1 + t2))
z1 / z2 = (r1 / r2) * exp(i * (t1 - t2))
z1 ** z2 = exp(z2 * log z1)
~z = a - bi
abs(z) = r1 = sqrt(a*a + b*b)
sqrt(z) = sqrt(r1) * exp(i * t/2)
exp(z) = exp(a) * exp(i * b)
log(z) = log(r1) + i*t
sin(z) = 1/2i (exp(i * z1) - exp(-i * z))
cos(z) = 1/2 (exp(i * z1) + exp(-i * z))
atan2(y, x) = atan(y / x) # Minding the right quadrant, note the order.
The definition used for complex arguments of atan2() is
-i log((x + iy)/sqrt(x*x+y*y))
Note that atan2(0, 0) is not well-defined.
The following extra operations are supported on both real and complex
numbers:
Re(z) = a
Im(z) = b
arg(z) = t
abs(z) = r
cbrt(z) = z ** (1/3)
log10(z) = log(z) / log(10)
logn(z, n) = log(z) / log(n)
tan(z) = sin(z) / cos(z)
csc(z) = 1 / sin(z)
sec(z) = 1 / cos(z)
cot(z) = 1 / tan(z)
asin(z) = -i * log(i*z + sqrt(1-z*z))
acos(z) = -i * log(z + i*sqrt(1-z*z))
atan(z) = i/2 * log((i+z) / (i-z))
acsc(z) = asin(1 / z)
asec(z) = acos(1 / z)
acot(z) = atan(1 / z) = -i/2 * log((i+z) / (z-i))
sinh(z) = 1/2 (exp(z) - exp(-z))
cosh(z) = 1/2 (exp(z) + exp(-z))
tanh(z) = sinh(z) / cosh(z) = (exp(z) - exp(-z)) / (exp(z) + exp(-z))
csch(z) = 1 / sinh(z)
sech(z) = 1 / cosh(z)
coth(z) = 1 / tanh(z)
asinh(z) = log(z + sqrt(z*z+1))
acosh(z) = log(z + sqrt(z*z-1))
atanh(z) = 1/2 * log((1+z) / (1-z))
acsch(z) = asinh(1 / z)
asech(z) = acosh(1 / z)
acoth(z) = atanh(1 / z) = 1/2 * log((1+z) / (z-1))
I<arg>, I<abs>, I<log>, I<csc>, I<cot>, I<acsc>, I<acot>, I<csch>,
I<coth>, I<acosech>, I<acotanh>, have aliases I<rho>, I<theta>, I<ln>,
I<cosec>, I<cotan>, I<acosec>, I<acotan>, I<cosech>, I<cotanh>,
I<acosech>, I<acotanh>, respectively. C<Re>, C<Im>, C<arg>, C<abs>,
C<rho>, and C<theta> can be used also as mutators. The C<cbrt>
returns only one of the solutions: if you want all three, use the
C<root> function.
The I<root> function is available to compute all the I<n>
roots of some complex, where I<n> is a strictly positive integer.
There are exactly I<n> such roots, returned as a list. Getting the
number mathematicians call C<j> such that:
1 + j + j*j = 0;
is a simple matter of writing:
$j = ((root(1, 3))[1];
The I<k>th root for C<z = [r,t]> is given by:
(root(z, n))[k] = r**(1/n) * exp(i * (t + 2*k*pi)/n)
You can return the I<k>th root directly by C<root(z, n, k)>,
indexing starting from I<zero> and ending at I<n - 1>.
The I<spaceship> numeric comparison operator, E<lt>=E<gt>, is also
defined. In order to ensure its restriction to real numbers is conform
to what you would expect, the comparison is run on the real part of
the complex number first, and imaginary parts are compared only when
the real parts match.
=head1 CREATION
To create a complex number, use either:
$z = LONCAPA::LCMathComplex->make(3, 4);
$z = cplx(3, 4);
if you know the cartesian form of the number, or
$z = 3 + 4*i;
if you like. To create a number using the polar form, use either:
$z = LONCAPA::LCMathComplex->emake(5, pi/3);
$x = cplxe(5, pi/3);
instead. The first argument is the modulus, the second is the angle
(in radians, the full circle is 2*pi). (Mnemonic: C<e> is used as a
notation for complex numbers in the polar form).
It is possible to write:
$x = cplxe(-3, pi/4);
but that will be silently converted into C<[3,-3pi/4]>, since the
modulus must be non-negative (it represents the distance to the origin
in the complex plane).
It is also possible to have a complex number as either argument of the
C<make>, C<emake>, C<cplx>, and C<cplxe>: the appropriate component of
the argument will be used.
$z1 = cplx(-2, 1);
$z2 = cplx($z1, 4);
The C<new>, C<make>, C<emake>, C<cplx>, and C<cplxe> will also
understand a single (string) argument of the forms
2-3i
-3i
[2,3]
[2,-3pi/4]
[2]
in which case the appropriate cartesian and exponential components
will be parsed from the string and used to create new complex numbers.
The imaginary component and the theta, respectively, will default to zero.
The C<new>, C<make>, C<emake>, C<cplx>, and C<cplxe> will also
understand the case of no arguments: this means plain zero or (0, 0).
=head1 DISPLAYING
When printed, a complex number is usually shown under its cartesian
style I<a+bi>, but there are legitimate cases where the polar style
I<[r,t]> is more appropriate. The process of converting the complex
number into a string that can be displayed is known as I<stringification>.
By calling the class method C<LONCAPA::LCMathComplex::display_format> and
supplying either C<"polar"> or C<"cartesian"> as an argument, you
override the default display style, which is C<"cartesian">. Not
supplying any argument returns the current settings.
This default can be overridden on a per-number basis by calling the
C<display_format> method instead. As before, not supplying any argument
returns the current display style for this number. Otherwise whatever you
specify will be the new display style for I<this> particular number.
For instance:
use LONCAPA::LCMathComplex;
LONCAPA::LCMathComplex::display_format('polar');
$j = (root(1, 3))[1];
print "j = $j\n"; # Prints "j = [1,2pi/3]"
$j->display_format('cartesian');
print "j = $j\n"; # Prints "j = -0.5+0.866025403784439i"
The polar style attempts to emphasize arguments like I<k*pi/n>
(where I<n> is a positive integer and I<k> an integer within [-9, +9]),
this is called I<polar pretty-printing>.
For the reverse of stringifying, see the C<make> and C<emake>.
=head2 CHANGED IN PERL 5.6
The C<display_format> class method and the corresponding
C<display_format> object method can now be called using
a parameter hash instead of just a one parameter.
The old display format style, which can have values C<"cartesian"> or
C<"polar">, can be changed using the C<"style"> parameter.
$j->display_format(style => "polar");
The one parameter calling convention also still works.
$j->display_format("polar");
There are two new display parameters.
The first one is C<"format">, which is a sprintf()-style format string
to be used for both numeric parts of the complex number(s). The is
somewhat system-dependent but most often it corresponds to C<"%.15g">.
You can revert to the default by setting the C<format> to C<undef>.
# the $j from the above example
$j->display_format('format' => '%.5f');
print "j = $j\n"; # Prints "j = -0.50000+0.86603i"
$j->display_format('format' => undef);
print "j = $j\n"; # Prints "j = -0.5+0.86603i"
Notice that this affects also the return values of the
C<display_format> methods: in list context the whole parameter hash
will be returned, as opposed to only the style parameter value.
This is a potential incompatibility with earlier versions if you
have been calling the C<display_format> method in list context.
The second new display parameter is C<"polar_pretty_print">, which can
be set to true or false, the default being true. See the previous
section for what this means.
=head1 USAGE
Thanks to overloading, the handling of arithmetics with complex numbers
is simple and almost transparent.
Here are some examples:
use LONCAPA::LCMathComplex;
$j = cplxe(1, 2*pi/3); # $j ** 3 == 1
print "j = $j, j**3 = ", $j ** 3, "\n";
print "1 + j + j**2 = ", 1 + $j + $j**2, "\n";
$z = -16 + 0*i; # Force it to be a complex
print "sqrt($z) = ", sqrt($z), "\n";
$k = exp(i * 2*pi/3);
print "$j - $k = ", $j - $k, "\n";
$z->Re(3); # Re, Im, arg, abs,
$j->arg(2); # (the last two aka rho, theta)
# can be used also as mutators.
=head1 CONSTANTS
=head2 PI
The constant C<pi> and some handy multiples of it (pi2, pi4,
and pip2 (pi/2) and pip4 (pi/4)) are also available if separately
exported:
use LONCAPA::LCMathComplex ':pi';
$third_of_circle = pi2 / 3;
=head2 Inf
The floating point infinity can be exported as a subroutine Inf():
use LONCAPA::LCMathComplex qw(Inf sinh);
my $AlsoInf = Inf() + 42;
my $AnotherInf = sinh(1e42);
print "$AlsoInf is $AnotherInf\n" if $AlsoInf == $AnotherInf;
Note that the stringified form of infinity varies between platforms:
it can be for example any of
inf
infinity
INF
1.#INF
or it can be something else.
Also note that in some platforms trying to use the infinity in
arithmetic operations may result in Perl crashing because using
an infinity causes SIGFPE or its moral equivalent to be sent.
The way to ignore this is
local $SIG{FPE} = sub { };
=head1 ERRORS DUE TO DIVISION BY ZERO OR LOGARITHM OF ZERO
The division (/) and the following functions
log ln log10 logn
tan sec csc cot
atan asec acsc acot
tanh sech csch coth
atanh asech acsch acoth
cannot be computed for all arguments because that would mean dividing
by zero or taking logarithm of zero. These situations cause fatal
runtime errors looking like this
cot(0): Division by zero.
(Because in the definition of cot(0), the divisor sin(0) is 0)
Died at ...
or
atanh(-1): Logarithm of zero.
Died at...
For the C<csc>, C<cot>, C<asec>, C<acsc>, C<acot>, C<csch>, C<coth>,
C<asech>, C<acsch>, the argument cannot be C<0> (zero). For the
logarithmic functions and the C<atanh>, C<acoth>, the argument cannot
be C<1> (one). For the C<atanh>, C<acoth>, the argument cannot be
C<-1> (minus one). For the C<atan>, C<acot>, the argument cannot be
C<i> (the imaginary unit). For the C<atan>, C<acoth>, the argument
cannot be C<-i> (the negative imaginary unit). For the C<tan>,
C<sec>, C<tanh>, the argument cannot be I<pi/2 + k * pi>, where I<k>
is any integer. atan2(0, 0) is undefined, and if the complex arguments
are used for atan2(), a division by zero will happen if z1**2+z2**2 == 0.
Note that because we are operating on approximations of real numbers,
these errors can happen when merely `too close' to the singularities
listed above.
=head1 ERRORS DUE TO INDIGESTIBLE ARGUMENTS
The C<make> and C<emake> accept both real and complex arguments.
When they cannot recognize the arguments they will die with error
messages like the following
LONCAPA::LCMathComplex::make: Cannot take real part of ...
LONCAPA::LCMathComplex::make: Cannot take real part of ...
LONCAPA::LCMathComplex:emake: Cannot take rho of ...
LONCAPA::LCMathComplex::emake: Cannot take theta of ...
=head1 BUGS
Saying C<use LONCAPA::LCMathComplex;> exports many mathematical routines in the
caller environment and even overrides some (C<sqrt>, C<log>, C<atan2>).
This is construed as a feature by the Authors, actually... ;-)
All routines expect to be given real or complex numbers. Don't attempt to
use BigFloat, since Perl has currently no rule to disambiguate a '+'
operation (for instance) between two overloaded entities.
In Cray UNICOS there is some strange numerical instability that results
in root(), cos(), sin(), cosh(), sinh(), losing accuracy fast. Beware.
The bug may be in UNICOS math libs, in UNICOS C compiler, in LONCAPA::LCMathComplex.
Whatever it is, it does not manifest itself anywhere else where Perl runs.
=head1 SEE ALSO
L<Math::Trig>
=head1 AUTHORS
Daniel S. Lewart <F<lewart!at!uiuc.edu>>
Jarkko Hietaniemi <F<jhi!at!iki.fi>>
Raphael Manfredi <F<Raphael_Manfredi!at!pobox.com>>
=head1 LICENSE
This library is free software; you can redistribute it and/or modify
it under the same terms as Perl itself.
=cut
1;
# eof
More information about the LON-CAPA-cvs
mailing list