[LON-CAPA-cvs] cvs: doc /build F11_install.frag F12_install.frag F13_install.frag F14_install.frag F15_install.frag F16_install.frag
raeburn
raeburn at source.lon-capa.org
Sat Nov 26 22:06:30 EST 2011
raeburn Sun Nov 27 03:06:30 2011 EDT
Modified files:
/doc/build F11_install.frag F12_install.frag F13_install.frag
F14_install.frag F15_install.frag F16_install.frag
Log:
- Balance HTML tags in Fedora installation instructions
- closing </p>
- <dl></dl>
Index: doc/build/F11_install.frag
diff -u doc/build/F11_install.frag:1.3 doc/build/F11_install.frag:1.4
--- doc/build/F11_install.frag:1.3 Sat Nov 26 20:08:01 2011
+++ doc/build/F11_install.frag Sun Nov 27 03:06:30 2011
@@ -51,7 +51,7 @@
You will need to know the following network settings for your installation.
<b>Note:</b>You must have a static IP address to use LON-CAPA.
DHCP is <em>not</em> supported.
-
+</p>
<ul>
<li>ip address </li>
<li>netmask </li>
@@ -114,10 +114,12 @@
<h3>Firewall Configuration</h3>
To configure the firewall settings, use the system-config-firewall utility. Execute: <p>
<pre>lokkit</pre></p><p>
+<dl style="list-style:square outside none">
<dt>Firewall Configuration</dt>
<dd>Select Security Level: Enabled, and allow incoming: SSH (remote login), WWW (HTTP) and secure WWW (HTTPS).</dd>
-<br />Exit the system-config-firewall</p>
-
+</dl>
+<br />Exit the system-config-firewall
+</p>
<h2>4. <a name="upd">Update your system</a></h2>
<p>
Update your system to the latest versions of the system software using yum.
Index: doc/build/F12_install.frag
diff -u doc/build/F12_install.frag:1.3 doc/build/F12_install.frag:1.4
--- doc/build/F12_install.frag:1.3 Sat Nov 26 20:08:01 2011
+++ doc/build/F12_install.frag Sun Nov 27 03:06:30 2011
@@ -51,7 +51,7 @@
You will need to know the following network settings for your installation.
<b>Note:</b>You must have a static IP address to use LON-CAPA.
DHCP is <em>not</em> supported.
-
+</p>
<ul>
<li>ip address </li>
<li>netmask </li>
@@ -114,10 +114,12 @@
<h3>Firewall Configuration</h3>
To configure the firewall settings, use the system-config-firewall utility. Execute: <p>
<pre>lokkit</pre></p><p>
+<dl style="list-style:square outside none">
<dt>Firewall Configuration</dt>
<dd>Select Security Level: Enabled, and allow incoming: SSH (remote login), WWW (HTTP) and secure WWW (HTTPS).</dd>
-<br />Exit the system-config-firewall</p>
-
+</dl>
+<br />Exit the system-config-firewall
+</p>
<h2>4. <a name="upd">Update your system</a></h2>
<p>
Update your system to the latest versions of the system software using yum.
Index: doc/build/F13_install.frag
diff -u doc/build/F13_install.frag:1.2 doc/build/F13_install.frag:1.3
--- doc/build/F13_install.frag:1.2 Sat Nov 26 20:08:01 2011
+++ doc/build/F13_install.frag Sun Nov 27 03:06:30 2011
@@ -51,7 +51,7 @@
You will need to know the following network settings for your installation.
<b>Note:</b>You must have a static IP address to use LON-CAPA.
DHCP is <em>not</em> supported.
-
+</p>
<ul>
<li>ip address </li>
<li>netmask </li>
@@ -59,7 +59,6 @@
<li>gateway </li>
<li>domain name server(s) </li>
</ul>
-
<h2>3. <a name="lin">Minimal Fedora 13 Install</a></h2>
<p>
Installing Fedora is quite easy if you've installed any of the Red Hat products
@@ -114,10 +113,12 @@
<h3>Firewall Configuration</h3>
To configure the firewall settings, use the system-config-firewall utility. Execute: <p>
<pre>lokkit</pre></p><p>
+<dl style="list-style:square outside none">
<dt>Firewall Configuration</dt>
<dd>Select Security Level: Enabled, and allow incoming: SSH (remote login), WWW (HTTP) and secure WWW (HTTPS).</dd>
-<br />Exit the system-config-firewall</p>
-
+</dl>
+<br />Exit the system-config-firewall
+</p>
<h2>4. <a name="upd">Update your system</a></h2>
<p>
Update your system to the latest versions of the system software using yum.
Index: doc/build/F14_install.frag
diff -u doc/build/F14_install.frag:1.2 doc/build/F14_install.frag:1.3
--- doc/build/F14_install.frag:1.2 Sat Nov 26 20:08:01 2011
+++ doc/build/F14_install.frag Sun Nov 27 03:06:30 2011
@@ -51,7 +51,7 @@
You will need to know the following network settings for your installation.
<b>Note:</b>You must have a static IP address to use LON-CAPA.
DHCP is <em>not</em> supported.
-
+</p>
<ul>
<li>ip address </li>
<li>netmask </li>
@@ -59,7 +59,6 @@
<li>gateway </li>
<li>domain name server(s) </li>
</ul>
-
<h2>3. <a name="lin">Minimal Fedora 14 Install</a></h2>
<p>
Installing Fedora is quite easy if you've installed any of the Red Hat products
@@ -114,10 +113,12 @@
<h3>Firewall Configuration</h3>
To configure the firewall settings, use the system-config-firewall utility. Execute: <p>
<pre>lokkit</pre></p><p>
+<dl style="list-style:square outside none">
<dt>Firewall Configuration</dt>
<dd>Select Security Level: Enabled, and allow incoming: SSH (remote login), WWW (HTTP) and secure WWW (HTTPS).</dd>
-<br />Exit the system-config-firewall</p>
-
+</dl>
+<br />Exit the system-config-firewall
+</p>
<h2>4. <a name="upd">Update your system</a></h2>
<p>
Update your system to the latest versions of the system software using yum.
Index: doc/build/F15_install.frag
diff -u doc/build/F15_install.frag:1.4 doc/build/F15_install.frag:1.5
--- doc/build/F15_install.frag:1.4 Sat Nov 26 20:08:01 2011
+++ doc/build/F15_install.frag Sun Nov 27 03:06:30 2011
@@ -51,7 +51,7 @@
You will need to know the following network settings for your installation.
<b>Note:</b>You must have a static IP address to use LON-CAPA.
DHCP is <em>not</em> supported.
-
+</p>
<ul>
<li>ip address </li>
<li>netmask </li>
@@ -59,7 +59,6 @@
<li>gateway </li>
<li>domain name server(s) </li>
</ul>
-
<h2>3. <a name="lin">Minimal Fedora 15 Install</a></h2>
<p>
Installing Fedora is quite easy if you've installed any of the Red Hat products
@@ -114,10 +113,12 @@
<h3>Firewall Configuration</h3>
To configure the firewall settings, use the system-config-firewall utility. Execute: <p>
<pre>system-config-firewall-tui</pre></p><p>
+<dl style="list-style:square outside none">
<dt>Firewall Configuration</dt>
<dd>Select Security Level: Enabled, and allow incoming: SSH (remote login), WWW (HTTP) and secure WWW (HTTPS).</dd>
-<br />Exit the system-config-firewall</p>
-
+</dl>
+<br />Exit the system-config-firewall
+</p>
<h2>4. <a name="upd">Update your system</a></h2>
<p>
Update your system to the latest versions of the system software using yum.
Index: doc/build/F16_install.frag
diff -u doc/build/F16_install.frag:1.1 doc/build/F16_install.frag:1.2
--- doc/build/F16_install.frag:1.1 Sat Nov 26 20:08:44 2011
+++ doc/build/F16_install.frag Sun Nov 27 03:06:30 2011
@@ -51,7 +51,7 @@
You will need to know the following network settings for your installation.
<b>Note:</b>You must have a static IP address to use LON-CAPA.
DHCP is <em>not</em> supported.
-
+</p>
<ul>
<li>ip address </li>
<li>netmask </li>
@@ -59,7 +59,6 @@
<li>gateway </li>
<li>domain name server(s) </li>
</ul>
-
<h2>3. <a name="lin">Minimal Fedora 16 Install</a></h2>
<p>
Installing Fedora is quite easy if you've installed any of the Red Hat products
@@ -114,10 +113,12 @@
<h3>Firewall Configuration</h3>
To configure the firewall settings, use the system-config-firewall utility. Execute: <p>
<pre>system-config-firewall-tui</pre></p><p>
+<dl style="list-style:square outside none">
<dt>Firewall Configuration</dt>
<dd>Select Security Level: Enabled, and allow incoming: SSH (remote login), WWW (HTTP) and secure WWW (HTTPS).</dd>
-<br />Exit the system-config-firewall</p>
-
+</dl>
+<br />Exit the system-config-firewall
+</p>
<h2>4. <a name="upd">Update your system</a></h2>
<p>
Update your system to the latest versions of the system software using yum.
More information about the LON-CAPA-cvs
mailing list