[LON-CAPA-cvs] cvs: doc /build suse9.2_install.frag

[raeburn]

raeburn		Mon Aug  1 00:54:54 2005 EDT

  Modified files:              
    /doc/build	suse9.2_install.frag 
  Log:
  Fix some typos.
  
  
Index: doc/build/suse9.2_install.frag
diff -u doc/build/suse9.2_install.frag:1.1 doc/build/suse9.2_install.frag:1.2
--- doc/build/suse9.2_install.frag:1.1	Sun Jul 31 17:19:23 2005
+++ doc/build/suse9.2_install.frag	Mon Aug  1 00:54:52 2005
@@ -1,4 +1,4 @@
-<h1>Installing LON-CAPA on a minimal SuSE 9.2 Linux Preofessional System</h1>
+<h1>Installing LON-CAPA on a minimal SuSE 9.2 Linux Professional System</h1>
 <p>
 This document guides you through the process of setting up a new LON-CAPA
 server running SuSE Linux Professional 9.2 (SLP 9.2) with a minimum of packages installed.  
@@ -24,7 +24,7 @@
 The installation process takes the following steps:
 </p>
 <ol>
-  <li> Obtain SLP 9.2 installation media (DVD, CDs or mini-installation CD</li>
+  <li> Obtain SLP 9.2 installation media (DVD, CDs or mini-installation CD)</li>
   <li> Determine Network Settings</li>
   <li> Install SLP 9.2</li>
   <li> Update your system </li>
@@ -59,8 +59,8 @@
 before.  Some documentation is available from 
 <a href="ttp://www.novell.com/documentation/suse92/">
 http://www.novell.com/documentation/suse92/</a>.<br /><br />
-If booting from a mini installation CD, use F3 to select TP or HTTP, and provide the IP address of a SuSE 9.2 mirror and a path to the 9.2 directory (e.g., 204.152.191.7  and suse/i386/9.2/), and enter the network information in the boot configuration (e.g., hostip=IPADDRESS netmask=NETMASK gateway=GATEWAY, replacing IPADDRESS, NETMASK and GATEWAY with appropriate values for your server.<br /><br />     
-Most of the subsequent installation screens are self explanatory.  
+If booting from a mini installation CD, use F3 to select FTP or HTTP, and provide the IP address of a SuSE 9.2 mirror and a path to the 9.2 directory (e.g., 204.152.191.7  and suse/i386/9.2/), and enter the network information in the boot configuration (e.g., hostip=IPADDRESS netmask=NETMASK gateway=GATEWAY), replacing IPADDRESS, NETMASK and GATEWAY with appropriate values for your server.<br /><br />     
+Most of the subsequent installation screens are self explanatory.
 There are a few steps that require comment and are dealt with below.
 </p>
 <dl style="list-style:square outside none">
@@ -96,7 +96,7 @@
        IP address.  When configuring your network card, you should include host name information (e.g., host name = tmp1, domain = lite.msu.edu), as well as name server. Other settings (ip address, gateway, netmask will have been set when you included them in the boot configuration).
    </dd>
    <dt>Online update</dt>
-   <dd>Indicate "Yes" when prompted to "run online update now?</dd>
+   <dd>Indicate "Yes" when prompted to "run online update now?"</dd>
    </dt>
 </dl>
 <p>
@@ -116,6 +116,7 @@
 </p>
 <h3>Add an additional installation source</h3>
 <p>Add the LON-CAPA SuSE 9.2 repository as an additional installation source, so software installation in yast will have access to two repositories - a SuSE mirror (for packages included for the standard distribution) and the LON-CAPA repository (for extra packages needed to run LON-CAPA). For the LON-CAPA source you will use:
+<dl style="list-style:square outside none">
 <dd>Protocol</dd>
 <dt>HTTP</dt>
 <dd>Server Name</dd>
@@ -124,6 +125,7 @@
 <dt>suse/9.2</dt>
 <dd>Authentication</dd>
 <dt>Anonymous</dt>
+</dl>
 After saving this configuration information for the LON-CAPA repository, choose "Edit", then "Refresh" the quit yast.    
 </p>
 <h2>Update pwdutils package</h2>
@@ -236,7 +238,7 @@
 If you receive warnings when starting the httpd about missing perl modules,
 please make sure you followed the instructions in 
 <b>Installing LON-CAPA Dependencies</b>.  If you still have errors, please
-contact the LON-CAPA development team.
+contact the LON-CAPA support team.
 </p>
 <h2>Log in to your LON-CAPA Machine</h2>
 <p>