[LON-CAPA-cvs] cvs: loncom / loncnew

albertel lon-capa-cvs@mail.lon-capa.org
Fri, 21 Nov 2003 19:27:18 -0000


albertel		Fri Nov 21 14:27:18 2003 EDT

  Modified files:              
    /loncom	loncnew 
  Log:
  - removing Debugging use lib
  - removing change log
  
  
Index: loncom/loncnew
diff -u loncom/loncnew:1.31 loncom/loncnew:1.32
--- loncom/loncnew:1.31	Tue Oct 28 05:48:10 2003
+++ loncom/loncnew	Fri Nov 21 14:27:18 2003
@@ -2,7 +2,7 @@
 # The LearningOnline Network with CAPA
 # lonc maintains the connections to remote computers
 #
-# $Id: loncnew,v 1.31 2003/10/28 10:48:10 foxr Exp $
+# $Id: loncnew,v 1.32 2003/11/21 19:27:18 albertel Exp $
 #
 # Copyright Michigan State University Board of Trustees
 #
@@ -43,114 +43,8 @@
 #    - Detect transmission timeouts.
 #
 
-# Change log:
-#    $Log: loncnew,v $
-#    Revision 1.31  2003/10/28 10:48:10  foxr
-#    Call LondConnection::ReadConfig explicitly so that the configuration is loaded
-#    prior to getting the hosts table hashiterator.
-#
-#    Revision 1.30  2003/10/27 10:09:21  foxr
-#    Tighten up a few compares to eq and flip a few debug levels around... nothing
-#    critical
-#
-#    Revision 1.29  2003/10/21 14:24:42  foxr
-#    Fix little typo that may explain growth of connections
-#
-#    Revision 1.28  2003/10/14 15:36:21  albertel
-#    - making it easier to run loncnew,
-#       /etc/init.d/loncontrol startnew
-#       /etc/init.d/loncontrol restartnew
-#      will now start loncnew in place of lonc
-#
-#    Revision 1.27  2003/10/07 11:23:03  foxr
-#    Installed and tested code to process reinit in parent server.
-#
-#    Revision 1.26  2003/09/30 11:11:17  foxr
-#    Add book-keeping hashes to support the re-init procedure.
-#
-#    Revision 1.25  2003/09/23 11:22:14  foxr
-#    Tested ability to receive sigusr2  This is now logged and must be
-#    properly implemented as a re-read of hosts and re-init of appropriate
-#    children.
-#
-#    Revision 1.24  2003/09/16 09:46:42  foxr
-#    Added skeletal infrastructure to support SIGUSR2 update hosts request.
-#
-#    Revision 1.23  2003/09/15 09:24:49  foxr
-#    Add use strict and fix all the fallout from that.
-#
-#    Revision 1.22  2003/09/02 10:34:47  foxr
-#    - Fix errors in host dead detection logic (too many cases where the
-#      retries left were not getting incremented or just not checked).
-#    - Added some additional status to the ps axuww display:
-#      o Remaining retries on a host.
-#      o >>> DEAD <<< indicator if I've given up on a host.
-#    - Tested the SIGHUP will reset the retries remaining count (thanks to
-#      the above status stuff, and get allow the loncnew to re-try again
-#      on the host (thanks to the log).
-#
-#    Revision 1.21  2003/08/26 09:19:51  foxr
-#    How embarrassing... put in the SocketTimeout function in loncnew and forgot
-#    to actually hook it into the LondTransaction.  Added this to MakeLondConnection
-#    where it belongs... hopefully transactions (not just connection attempts) will
-#    timeout more speedily than the socket errors will catch it.
-#
-#    Revision 1.20  2003/08/25 18:48:11  albertel
-#    - fixing a forgotten ;
-#
-#    Revision 1.19  2003/08/19 09:31:46  foxr
-#    Get socket directory from configuration rather than the old hard coded test
-#    way that I forgot to un-hard code.
-#
-#    Revision 1.18  2003/08/06 09:52:29  foxr
-#    Also needed to remember to fail in-flight transactions if their sends fail.
-#
-#    Revision 1.17  2003/08/03 00:44:31  foxr
-#    1. Correct handling of connection failure: Assume it means the host is
-#       unreachable and fail all of the queued transactions.  Note that the
-#       inflight transactions should fail on their own time due either to timeout
-#       or send/receive failures.
-#    2. Correct handling of logs for forced death signals.  Pull the signal
-#       from the event watcher.
-#
-#    Revision 1.16  2003/07/29 02:33:05  foxr
-#    Add SIGINT processing to child processes to toggle annoying trace mode
-#    on/off.. will try to use this to isolate the compute boud process issue.
-#
-#    Revision 1.15  2003/07/15 02:07:05  foxr
-#    Added code for lonc/lond transaction timeouts.  Who knows if it works right.
-#    The intent is for a timeout to fail any transaction in progress and kill
-#    off the sockt that timed out.
-#
-#    Revision 1.14  2003/07/03 02:10:18  foxr
-#    Get all of the signals to work correctly.
-#
-#    Revision 1.13  2003/07/02 01:31:55  foxr
-#    Added kill -HUP logic (restart).
-#
-#    Revision 1.11  2003/06/25 01:54:44  foxr
-#    Fix more problems with transaction failure.
-#
-#    Revision 1.10  2003/06/24 02:46:04  foxr
-#    Put a limit on  the number of times we'll retry a connection.
-#    Start getting the signal stuff put in as well...note that need to get signals
-#    going or else the client will permanently give up on dead servers.
-#
-#    Revision 1.9  2003/06/13 02:38:43  foxr
-#    Add logging in 'expected format'
-#
-#    Revision 1.8  2003/06/11 02:04:35  foxr
-#    Support delayed transactions... this is done uniformly by encapsulating
-#    transactions in an object ... a LondTransaction that is implemented by
-#    LondTransaction.pm
-#
-#    Revision 1.7  2003/06/03 01:59:39  foxr
-#    complete coding to support deferred transactions.
-#
-#
 use strict;
 use lib "/home/httpd/lib/perl/";
-use lib "/home/foxr/newloncapa/types";
 use Event qw(:DEFAULT );
 use POSIX qw(:signal_h);
 use POSIX;